background image

GridBee AP Mixers.

  These units are warranted to be free of defective parts, materials, and

workmanship for a period of two years from the date of installation. This warranty is limited to the

repair or replacement of defective components only and does not apply to normal wear and tear.  If the 

factory’s service crews performed the original on-site placement and startup, then this warranty also 

includes labor.  Where labor is included, in lieu of sending a factory service crew to the site for minor 

repairs, Ixom may choose to send the replacement parts to the owner postage-paid and may pay the 

owner a reasonable labor allowance, as determined solely by Ixom, to install the parts.

GridBee air pumps, air compressors, control panels, and any optional accessories.

 These items 

are considered “buyout” items for Ixom, and as such include a warranty against defects in material and 

workmanship for one year from the date of purchase.  This warranty covers parts only, not labor.  Parts 

that are  determined by Ixom to be defective in material or workmanship under normal use during the 

one year warranty period will be repaired or replaced.  Shipping charges are the responsibility of the 

customer.

Terms applicable to all equipment. 

 This Limited Replacement Warranty is subject to the terms of 

Ixom’s General Terms and Conditions of Sale.  In the event of any inconsistency between the terms of 

this Limited Replacement Warranty and Ixom’s General Terms and Conditions of Sale, the terms of this 

Limited Replacement Warranty shall prevail to the extent of that inconsistency.

© 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | [email protected]

Warranty

GridBee AP Mixers Limited Replacement Warranty

1756_10067_20200420

O&M_AP7000_&_AP8000_10097_20200602 - 14

Summary of Contents for Medora AP7000


















Reviews: