Impeller Rotational Speed Check
During clear skies and good sunlight weather
conditions, the drive system of the unit should
operate:
1) At a rotational speed between 55 and 85
revolutions per minute (rpm).
2) In a clockwise direction when looking down at
the impeller.
Checking Rotational Speed
TOOLS RECOMMENDED:
Watch or Stopwatch
STEP 1:
Locate the flag indicator on the impeller
shaft.
STEP 2:
Start the stopwatch or mark a starting
point on the watch. Immediately begin counting
each full revolution of the flag indicator (starting
with "ZERO", "ONE", "TWO", etc) for a time of less
than or equal to 1 minute and at least 20 seconds.
This step is easier with two people, one counting
revolutions and the other keeping track of the time
expired.
STEP 3:
Quit counting revolutions and immediately
observe how much time has expired in seconds.
STEP 4:
Use the following equation to calculate
rotational speed in rpms:
Example: 30 Revolutions were counted in a time period
of 30 seconds.
RPM = (30 revolutions X 60) / (30 seconds) = 60
Impeller Rotational Speed = 60 RPMs
(# Revolutions Counted X 60)
# Seconds Expired
DIVIDED BY
Revolutions Per
Minute (RPM)
=
Clockwise Rotation When Looking Down
Flag Indicator Section of Impeller Shaft
Flag Indicator
MODEL MAY VARY
©2022 IXOM Watercare Inc. | www.ixomwatercare.com | 866 - 437 - 8076 | [email protected]
Maintenance
RPM Check
SB/GF Series
10413_20220110
O&M_GF2500_10115_20220121 - 24
