YARRA FIRE PIT (MODEL NO. IXLYARFP) ASSEMBLY INSTRUCTIONS
Assemble the stand sides with
flange on the inside and insert
screws from outside with nuts
on the inside of the base.
Place fire pit in top of stand as
shown in diagram.
* Gloves are to be worn when assembling fire pit.
* Panels may have sharp edges.
* Only finger tighten nuts until all bolts have been
inserted. Use supplied tools to secure fixings.
*This fire pit is made from Australian mild steel and is
designed to go rusty over a period, some panels may
have commenced this process when purchased.
FOR USER GUIDE PLEASE GO TO WWW.IXLAPPLIANCES.COM.AU
Fire Pit Dish x 1
Stand Sides x 4
Screw Driver x 1
M5 Spanner x 1
M5 Bolt x 12
M5 Hex Nut x 12
