IXIA UHD100T32, Getting Started Manual

Page: 67 / 91

kcos firewall enable
Use the kcos firewall enable command to enable the entire firewall, in which case KCOS opens only the
TCP and UDP ports that are defined by the application's firewall rules: incoming traffic on any other port is
blocked. The KCOS Firewall Service is enabled by default.
Syntax
kcos firewall enable [flags]
Flags
-h, --help Display help for the command
Arguments
None.
Examples
kcos firewall enable --help
See also
kcos firewall disable
kcos firewall show
Notes
When firewall is enabled, ports 80, 443, and 22 are open (for HTTP, HTTPS, and SSH, respectively).
Appendix A KCOS CLI command reference
913-2626-01 – 52 –