EOMs Operating Manual
Ref. Ed. 0
–
08/02/2021
9
6)
Remove the spring located on the DC pin:
Fig. 13
Fig. 13
7)
Once the modulator is unpacked, you can use it.
•
Remember to keep the blister pack if you need to store the modulator or send it back to us.
•
To pack the modulator, repeat the previous unpacking steps from the end to the beginning. Do
not forget to put the short circuit on DC pins (spring).
1.2
Warnings to avoid damage
Never hold modulator:
a.
by optical pigtails
b.
by pins or RF connector
Fig. 14
