IWILL ZPCgx User Manual Download

Page: 53 / 72

User’s Manual

1.1 Taking Care of the System Unit

•

Do not expose the system to extreme temperatures.

•

Do not expose the system unit to direct sunlight. Do not
place it near sources of heat such as a radiator.

•

Do not expose the system to rain or moisture.

•

Do not spill water or any liquid on the system.

•

Do not subject the system to magnetic fields.

•

Do not subject the system to heavy shock and vibration.

•

Do not expose the system to dust and dirt.

•

Do not place or drop objects on top of the system to avoid
damaging the system.

•

Do not place the system on uneven surfaces.

1.2 Taking Care of the Power Cord

•

Do not step on the power cord or place heavy objects on top
of it.

•

Do not connect the power cord to any other device.

•

When unplugging the power cord, do not pull on the cord
itself. Pull on the plug.

1.3 Cleaning and Servicing

1. Power off the system and unplug the power cord.

2. Use a soft cloth moistened with water. Do not use liquid or

aerosol cleaners.

Summary of Contents for ZPCgx









































































Search results

Summary of Contents for ZPCgx

Reviews:

Related manuals for ZPCgx

Brands by name

Popular brands

IWILL ZPCgx, User Manual

Search results

Summary of Contents for ZPCgx

Reviews:

Related manuals for ZPCgx

Brands by name

Popular brands