manualshive.com logo in svg

IWILL wa133, Manual, Page: 76 / 87

Share
Download
IWILL wa133 Manual Download Page 76

Chapter 6  Power Installer CD

76

WA133 Series

6.2.2 How to make driver diskette

6.2.2.1 Without O.S. installed

This bootable Power Installer CD also allows you to boot up your system, even when
the OS has not been installed.  During the boot-up process, you can perform “IWILL
Diskette Creator,” which will automatically make the driver diskettes you need.

At least one CD-ROM drive and one 1.44M floppy drive are necessary to
make “IWILL Diskette Creator” work properly.

Follow the instructions below to make your own device driver floppy diskettes if you
have a CD-ROM with IDE interface.  If you have already installed SCSI CD-ROM,
please make sure your SCSI host adapter supports bootable CD-ROM, and then proceed
directly to step 8 , and then finish the procedure.
1. First, power-on or “boot” your system.
2. Press  <Del> key during boot sequence to enter “ CMOS Setup Utility”
3. Use arrow keys to select “ADVANCED BIOS FEATURES” on the menu, then
press “Enter.”
4 . Select “First Boot Device” and change the default setting to “CDROM” using
Page Up /Page Down key.
5. Press <Esc> key to go back to CMOS SETUP Utility menu.
6. Press <F10> to select “Save and Exit Setup”
7. Press “Y” then “Enter” to complete.  Now you are able to boot up the system from
the CD-ROM.
8. Insert the Power Installer CD into the CD-ROM drive and re-start the computer.
9. IWILL Diskette Creator will now execute automatically for making your own driver
diskettes.
10.Make the desired driver diskettes according to the instructions displayed on screen.

6.2.2.2 Under windows 98/95/NT

You may just click on the software Make Driver Diskettes Utility shown on screen,
then select the driver you need, follow the messages shown on screen to complete.

6.2.3 How to Install Intel INF Installation Utility

You may just click on the Intel INF Installation Utility shown on screen that needs to be
installed, then follow the prompts to complete setup.

After completing O.S. installation,user must install “Intel INF Installation
Utility” first to avoid some problems during installation.

Summary of Contents for wa133
























































































Reviews:

No comments