
Chapter 4 Hardware Setup
49
WA133 Series
4.7.16 ATX Power Supply Connector
This connector connects to the ATX power supply. The plug from the power supply will only insert in
one orientation because of the different hole sizes.
In order to support the power up function other than power/soft-off
button, such as Wake-On-LAN, Wake-On-Modem, your ATX power
supply must supply at least 720mA 5VSB.
4.7.17 Power On Procedures
1. After all connections are made, close the system case over.
2. Be sure that all switches are off.
3 . Connect the power cord into the power supply located on the back of your system case
(please refer to the manual of your power supply).
4 . Connect the power cord into a power outlet that is equipped with a surge protector.
5 . Many of the power supply support 110V/220V by a switch setting. Switch your power
supply to the correct supply voltage (refer to the power supply’s manual).
6 . Turn on your system in the following order: