IWILL VX133 Manual Download

Page: 83 / 100

Chapter 5

On board Audio

5.1 Audio Features

5.1.1 Special Features

32 bit PCI bus master. Full duplex playback and recording,
built-in 16 bits CODEC.

HRTF 3D positional audio, supports both Direct Sound 3D®
& A3D® interfaces, supports earphones, two and four
channel speakers mode.

Support Windows 95/ 98/ 2000 and Windows NT 4.0.

MPU-401 Game/Midi port and legacy audio SB16 support.

Downloadable Wave Table Synthesizer, supports Direct
Music®.

5.1.2 Stereo Mixer and FM Music Synthesizer

Stereo analog mixing from CD-Audio, Line-in

Stereo digital mixing from Voice, FM/Wave-table, Digital CD-
Audio

Mono mixing from MIC and software adjustable volume

OPL3 FM synthesizer (4 operators)

Up to 15 melody sounds and 5 rhythm sounds (20 voices)

5.1.3 Game and Midi Interface

Fully compatible with MPU-401 Midi UART and Sound
Blaster Midi mode/ Standard IBM PC joystick/game port

Summary of Contents for VX133





































































































Search results

Summary of Contents for VX133

Reviews:

Related manuals for VX133

Brands by name

Popular brands

IWILL VX133, Manual

Search results

Summary of Contents for VX133

Reviews:

Related manuals for VX133

Brands by name

Popular brands