manualshive.com logo in svg

IWILL VX133, Manual

Share
Download
IWILL VX133 Manual Download Page 38

38

Chapter 4

BIOS Setup

4.2.3 Using BIOS setup program

If the system is no longer able to boot after changing the settings,
the only way to recover it is to clear the data stored in RTC CMOS.
To reset the RTC CMOS data, take the JP1 jumper cap off pins 1-2,
place onto pins 2-3, and then place back onto pins 1-2 again.  This
will return the RTC to the default setting.  Then, get into the BIOS
setup program , choose Load Fail-Safe Defaults ; Load Optimized
Defaults, and select the original manufacturer default settings in
your CMOS.

Ç

Up 

Move to the previous field 

È

Down 

Move to the next field 

Å

Left 

Move to the field on the left hand 
side 

Æ

Right 

Move to the field on the right hand 
side 

<Esc> 

Quit from setup program without 
saving changes, or Exit from 
current menu page and return to 
main menu page 

<PgUp> or 
<+> 

Select the previous value for a field 

<PgDn> or <-> 

Select the next value for a field 

<F1> General 

Help 

<F2> Item 

Help 

 

<F5> Previous 

Values 

<F6> Fail-Safe 

Defaults 

<F7> Optimized 

Defaults 

<F10>  

Save the current value and exit 
setup program   

 

Summary of Contents for VX133





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands