IWILL KK400 Series, User Manual

Page: 79 / 110

5: Sy 5: Sy
5: Sy 5: Sy
5: System Configur stem Configur
stem Configur stem Configur
stem Configuration ation
ation ation
ation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 5•17 5•17 5•17 5•17 5•17
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Integrated Peripherals
Main Section Functions
Configures the peripheral features integrated onto the
motherboard.
Default & Autodetected Settings
Everything on this screen is an optimized default. The
IDE transfer mode settings are autodetected. The system
will work with these defaults. The port settings are stan-
dard PC settings.
Setting Options & Constraints
You can disable onboard devices and change port set-
tings. If you’re going to use a USB keyboard, you have to
enable support for it from this screen.
You can disable the onboard audio feature if you need to.
The IDE HDD Block Mode feature should work with newer
IDE hard disk drives.
You may want to set Onboard Serial Port 2 to Disabled if
you aren’t going to use the onboard COM2 port.
CMOS Setup Utility – Integr CMOS Setup Utility – Integr CMOS Setup Utility – Integr CMOS Setup Utility – Integr CMOS Setup Utility – Integrated P ated P ated P ated P ated Peripher eripher eripher eripher eripherals als als als als