IWILL KK400 Series, User Manual

Page: 26 / 110

KK400 Series Motherboar KK400 Series Motherboar
KK400 Series Motherboar KK400 Series Motherboar
KK400 Series Motherboard d
d d
d
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 2•12 2•12 2•12 2•12 2•12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Serial-ATA Drive Connector J30 (KK400-RS)
Function: This connector is for connecting a Serial-ATA
hard disk drive to the motherboard.
Description: The Serial-ATA controller on the motherboard
supports one Serial-ATA device. There is one Serial-ATA
drive connector. The connector supports one drive, which
connects to the motherboard with a Serial-ATA cable. The
motherboard comes with a Serial-ATA cable.
More Information: See the section on “Connecting Inter-
nal Peripherals” in Chapter 5 for instructions on connect-
ing IDE drives. Technical specifications are listed in Chap-
ter 7.
S SS
SSA
A
A A ATTTTTA Driv
A Driv
A Driv A Driv A Drive Connector:
e Connector:
e Connector: e Connector: e Connector:
The connector supports
one SATA hard disk drive.
J30
J28
Highpoint IDE RAID Drive Connector (KK400-RS)
Function: The IDE connector marked J28 is for connect-
ing 2 IDE drives to the motherboard.
Description: The Highpoint HPT371 IDE RAID controller
on the motherboard supports IDE devices running in all
modes up through ATA-133. There is one IDE drive con-
nectors supporting two drives, a ‘Master’ and a ‘Slave’ that
connect to the motherboard with a suitable ribbon cable.
The Highpoint controller supports RAID 0 and RAID 1
arrays.
More Information: See the section on “Connecting Inter-
nal Peripherals” in Chapter 5 for instructions on connect-
ing IDE drives. Technical specifications are listed in Chap-
ter 7.
IDE RAID Connector IDE RAID Connector
IDE RAID Connector IDE RAID Connector IDE RAID Connector
RAID 0 and RAID 1 are
supported.