IWILL DP533 Series, User Manual

Page: 41 / 114

3: Motherboar 3: Motherboar
3: Motherboar 3: Motherboar
3: Motherboard Configur d Configur
d Configur d Configur
d Configuration ation
ation ation
ation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 3•1 3•1 3•1 3•1 3•1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
In This Chapter: In This Chapter:
In This Chapter: In This Chapter: In This Chapter:
The Default Configuration
Hardware Configuration: Jumper Settings
Firmware Configuration: The CMOS Setup Utility
Reconfiguring the Motherboard
Hardware Reconfiguration
Firmware Reconfiguration
3: Motherboar 3: Motherboar
3: Motherboar 3: Motherboar
3: Motherboard Configur d Configur
d Configur d Configur
d Configuration ation
ation ation
ation
This chapter deatils the motherboard’s default configura-
tion and configuration options. Please review the con-
tents of this chapter to find out information on the de-
fault configuration or alternative configuration options to
change the default configuration.
The motherboard will operate properly in the default con-
figuration. Please make certain that any configuration
changes you make will not adversely affect system op-
eration.
The Def The Def The Def The Def The Default Configur ault Configur ault Configur ault Configur ault Configuration ation ation ation ation
The default configuration is set at the time of manufac-
ture. The configuration is comprised of the hardware con-
figuration settings and the default firmware settings in
the BIOS CMOS Setup Utility.
Hardware Configuration: Jumper Settings
This motherboard is mainly configured in firmware, which
simplifies configuration. There are very few hardware set-
tings. The hardware settings are configured using stan-
dard jumper switches. The motherboard has three jumper
switches.