4.
Settings
In grinding mode the darkening function is off. During this time the LCD is the brightest
state, helping to get a clearer view next to a maximum protection.
4.2 SENSITIVITY control:
Before welding, please adjust the sensitivity to high position, if encountering the inter-
ference of Lighting lamp(the filter is darkening while not welding),please adjust the
sensitivity towards low position slightly until the filter returns to light state (please don’t
make the helmet towards to light lamp source during this process, should towards to
welding workpiece). During welding, the sensitivity knob should be adjusted as high
as possible, or it will affect the darkening speed of filter.
Attention! Operator must stop using the helmet immediately and contact with the
dealer in time if the filter can not be darkening or the darkening speed is slow or the
filter is flash!
4.1. Selecting the mode of use
A
PANTHER 4.6
model allows a choice of two user modes: welding and grinding
(Grind).
EN-5
