INTRODUCTION
The auto-darkening helmet with improved High Definition Filter Optics, delivers a new
generation of face and eye protection. Advanced integrated technology, such as
LCD, optoelectronics detection, solar power, and microelectronics are coordinat-
ed to produce one of the safest, fastest and most reliable auto-darkening helmets
available.
The auto-darkening helmet not only can efficiently protect operator’s eyes and face
from sparks, spatter, and harmful radiation under normal welding conditions, but
also can make both hands free and strike arc accurately resulting in increased
efficiency and improved quality welds. It may be widely used for various welding,
cutting, spraying and arc gouging, etc.
WARNINGS
●
This auto-darkening helmet is not suitable for "overhead" welding, laser welding/cut-
ting, or oxyacetylene welding/cutting applications.
●
This helmet will not protect against explosive devices or corrosive liquids. When
these hazards are present, mechanical guards or eye splash protection must be
used.
●
Impact resistant, primary eye protection, spectacles or goggles that meet current
ANSI specifications must be worn at all times when using this welding helmet.
●
Avoid work positions that could expose unprotected areas of the body to spark,
spatter, direct and/or reflected radiation. Use adequate protection if exposure
cannot be avoided.
●
Do not make any modifications to either the ADF cartridge or helmet, other than
those specified in this manual.
●
Do not use any replacement parts other than those specified in this manual.
Unauthorized modifications and replacement parts will void the warranty and ex-
pose the user to the risk of personal injury.
●
Do not immerse this helmet in water because this model is not waterproof.
●
Do not use any solvents on any ADF or helmet components.
●
The recommended operating temperature range for this ADF cartridge is
-10°C~65°C (14°F~149°F). Do not use this device beyond these temperature limits.
Failure to follow these warnings and/or failure to follow all of the operating instructions
could result in severe personal injury.
EN-2
