HU
EN
4-1. Interface and control panel of wire feeder
Interface of digital wire feeder:
During welding, the wire feeder can display actual current and voltage; during extended cable
welding, the wire feeder can display the current and voltage of the welding equipment.
The digital control panel can display welding angle, plate thickness, welding current, wire feeding
speed, inductance, arc length, welding voltage, welding speed and job mode. The left knob is
used to adjust the set current and inductance, while the right knob is used to adjust the set arc
length and job mode channel number.
Voltage adjusting knob
Water-cooling interface
Current adjustment knob
Welding torch interface
Digital control panel
4.
Wire Feeder
4-2. Structure of wire feeder
The wire feeder adopts four-wheel drive structure, as shown in the following figure.
Pressure regulating handle
15
