background image

1. 

Introduction

The 

FLIP-UP DIGITAL 5.2 

auto-darkening helmet with improved High Definition Filter 

Optics, delivers a new generation of face and eye protection. Advanced integrat

-

ed technology, such as LCD, optoelectronics detection, solar power, and micro

-

electronics are coordinated to produce one of the safest, fastest and most reliable 

auto-darkening helmets available. 

The auto-darkening helmet not only can efficiently protect operator’s eyes and face 

from sparks, spatter, and harmful radiation under normal welding conditions, but 

also can make both hands free and strike arc accurately resulting in increased 

efficiency and improved quality welds. It may be widely used for various welding, 

cutting, spraying and arc gouging, etc.

WARNINGS  

 This auto-darkening helmet is not suitable for "overhead" welding, laser 

welding/cutting, or oxyacetylene welding/cutting applications.

 This helmet will not protect against explosive devices or corrosive liquids. 

When these hazards are present, mechanical guards or eye splash protec

-

tion must be used.

 Impact resistant, primary eye protection, spectacles or goggles that meet 

current ANSI specifications must be worn at all times when using this weld

-

ing helmet.

 Avoid work positions that could expose unprotected areas of the body to 

spark, spatter, direct and/or reflected radiation. Use adequate protection 

if exposure cannot be avoided.

 Do not make any modifications to either the ADF cartridge or helmet, oth

-

er than those specified in this manual. 

 Do not use any replacement parts other than those specified in this manu

-

al. 

 

Unauthorized modifications and replacement parts will void the warranty 

and expose the user to the risk of personal injury.

 Do not immerse this helmet in water because this model is not waterproof.

 Do not use any solvents on any ADF or helmet components.

 The recommended operating temperature range for this ADF cartridge is 

-10°C~60°C. Do not use this device beyond these temperature limits.

Failure to follow these warnings and/or failure to follow all of the operating 

instructions could result in severe personal injury.

EN

3

2

Summary of Contents for FLIP-UP DIGITAL 5.2

























Reviews: