iWeld 80MLTFLUX153, User Manual

Page: 57 / 66

HU
EN
2-2. Installation
1. Insert the ground cable into the positive output (+) and connect the ground clamp to the
workpiece.
2. Connecting the earth cable to the workpiece.
3. Fix the welding wire coil to the rack axis on the wire feeder; make sure the hole of the wire feed-
ing wheel matches well with the bolt on the rack axis and the welding wire diameter. Unfasten
the screw on the wire-pressing wheel, and make the wire into the glove of the wire feed wheel,
press the wire tightly, but not too tight, and then thread the wire into the torch.
Attention! The welding machine can only be used with self-shilded, fl ux-cored welding wire!
2-3. Operation
1. Turn the power switch on the back panel to “ON” position, then the power LED turns on, and
the fan works.
2. Adjust the welding voltage and welding current according to practical needs.
3. Press the welding torch switch, and welding can be carried out.
2-4. Control panel
1
2
3
4
5
6
MIG DIY Welding Torch cpl. 800MIG153DIY
1 Gas Nozzle 9,5 mm 800CN15095
Gas Nozzle 12 mm 800CN15012
2 Contact Tip M6x25x0,9mm 340P091073
3 Contact Tip Holder 800CCTH150
4 Head insulator 8102P002003
5 Swan Neck 800CSN15AK
6 Switch 800CMIGSWI
3. The Welding Torch
Attention!
Before each use, check the condition of the welding torch!
The maintenance of the welding torch and the proper condi-
tion of its components are essential for reliable operation.
Parts list:
Power indicator Protection indicator
Current adjustment Voltage adjustment
Function switch and indicators
FCAW/LIFT-TIG/MMA
7