EN
EN
2.
INSTALLATION
1. Connect the torch to machine.
2. Connect power supply to the machine. (Please
confirm the power voltage, wrong power voltage
will damage the machine.)
3. Install torch head to the torch.
4. Turn on the machine, and trigger on the torch. The
torch head will heating.
1.
DESCRIPTION OF CONTROLS
A: Power pilot(green)
B: Over heated pilot(red)
C: Output connector -for torch power
D: Output connector -for torch control
E: Main switch
F: Input power cable (Confirm the power voltage before use)
G: Timer control
Select “—”:Trigger on torch, machine will work 1 second, and then stop till to trigger
on again.
Select“=”:Trigger on torch, machine will work 1.5 second, and then stop till to trigger
on again.
Select“O”: Trigger on torch, machine will be keeping work.
A B G
C
D
E
F
42
