EN
EN
3.
APPLICATION
1. Patented PFC power source, wide voltage
range: 185~250V
2. Small body, light weight, good efficiency:
10A breaker available, 110V workable, no
need industrial type breaker
3. Advanced 100kHz induction heating frequency:
According to the skin effect theory, higher induction frequency can reduce the
heat affected zone, make the heat more concentrated.
For remove screw & nut
Note: After heating,the strength of screw & nut will be reduce. Please don’t use the
screw & nut again. If any losses caused by the improper operation, has nothing to do
with the manufacturer.
Before Heating
After
Multi-angle workable
Multi-function torch head (used for glass /stickers)
HOT SPOT
Use special dent repair torch head
, induction heating will make the dent expan-
sion. Suggest to use timer control mode, heating time is 1 sec. Please don’t heating
repeatedly to the same working point. It may damage car body paint cause by over
heat.
43
