iWeld 800CUT55PFC, User Manual

Page: 24 / 32

Error messages:
1) When the machine appears over-heat, the screen will display error code “E01
Overheat”.
Over-heat: The alarm will release after the period of fan cooling. You can restart the
machine.
2) When the air pressure is too lower, the screen will display error code “E12 Undervolt-
age”.
3) The product uses three-phase input voltage. If the input voltage is short of phase,
the machine will not work properly, and the following alarm will appear.
Air check display (3)
• Press the air check key to check whether the air passage is smooth. If the machine
is working properly, the screen will display the air pressure value normally, as shown in
the figure below:
• If the machine is not ventilated or the air path is not smooth and the air pressure is
too low, it will cause the machine to alarm and display “E12 Undervoltage”, as shown
in the figure below:
EN-10