iWeld 800CUT55PFC, User Manual, Page: 23 / 32

3.3. Display introduction
1. Input voltage display
2. Cutting mode display
3. Pressure display
4. Working condition display
5. Current display
Cutting mode button (1)
Press the button to select Standard cutting, Grid cutting and 4T cutting mode.
Standard Cutting
Similar to the grid cutting mode, the difference is that the arc breaks immediately
when the cutting torch nozzle leaves the workpiece surface.
Grid Cutting
As long as the cutting torch switch is pressed down, the arc will form. When the cut-
ting torch leaves the workpiece surface, the arc will still exist. This function is used for
continuous cutting for workpiece.
4T cutting mode
When 4T operation is selected, press and release trigger to start gas, touch and lift
arc to start. Press and release trigger again to stop gas and arc.
EN-9