REL0.2
Page 50 of 58
i.MX8 SMARC SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.
TECHNICAL SPECIFICATION
This section provides detailed information about the i.MX8M SMARC SOM technical specification with Electrical,
Environmental and Mechanical characteristics.
3.1
Electrical Characteristics
The Module input power voltage is brought in on the ten VDD_IN pins and returned through the numerous GND pins
on the connector. A Module will withstand an indefinite exposure to an applied VDD_IN that may vary over the 4.6V
to 5.25V range, without damage, and it will operate over the entire VDD_IN range of 4.75V to 5. 25V.Ten pins are
allocated to VDD_IN. The connector pin current rating is 0.5A per pin. This works out to 5A total for the 10 pins.
Table 10: Power Input Requirement
Sl. No.
Power Rail
Min (V)
Typical (V)
Max(V)
Max Input Ripple
1
VDD_IN
1
4.75V
5V
5.25V
±50mV
¹ VDD_IN pin can be powered from either SMRAC Carrier Card or External power source.
3.1.1
Power Input Sequencing
The i.MX8M SMARC SOM
’s Power Input
sequence requirement is explained below.
Figure 5: Power Input Sequencing