iWave Hardware User Guide Hardware User'S Manual Download Page 56

Page: 56 / 80

REL1.0

Page 56 of 80

Zynq Ult MPSoC SOM Hardware User Guide

iWave Systems Technologies Pvt. Ltd.

B2B-2

Pin No

B2B Connector2

Pin Name

SoC Ball Name/

Pin Number

Signal Type/
Termination

Description

196

GTHRXN3_226

MGTHRXN3_226/
A3

I, DIFF

GTH Bank226 channel3 High speed
differential receiver negative.

200

GTHTXP3_226

MGTHTXP3_226/
A8

O, DIFF

GTH Bank226 channel3 High speed
differential transmitter positive.

202

GTHTXN3_226

MGTHTXN3_226/
A7

O, DIFF

GTH Bank226 channel3 High speed
differential transmitter negative.

188

GTREFCLK0P_226

MGTREFCLK0P_226/
D10

I, DIFF

GTH Bank226 differential reference
clock0 positive.

190

GTREFCLK0N_226

MGTREFCLK0N_226/
D9

I, DIFF

GTH Bank226 differential reference
clock0 negative.

223

GTREFCLK1P_226

MGTREFCLK1P_226/
B10

I, DIFF

GTH Bank226 differential reference
clock1 positive.

225

GTREFCLK1N_226

MGTREFCLK1N_226/
B9

I, DIFF

GTH Bank226 differential reference
clock1 negative.

Summary of Contents for Hardware User Guide

















































































Search results

Summary of Contents for Hardware User Guide

Reviews:

Brands by name

Popular brands

iWave Hardware User Guide, Hardware User'S Manual

Search results

Summary of Contents for Hardware User Guide

Reviews:

Brands by name

Popular brands