HOLD/DND (Hold/Do Not Disturb)
- This key is used
to put a call on Hold or to set the Do Not Disturb
function and prevent calls from ringing at your
extension.
Note:
See Hold/Quick Forward on page 11.
Handset Volume Control
- The handset volume
control key allows you to adjust the handset
volume to one of three levels. Pressing the key
will toggle between the three volume levels.
Speaker Volume Control
-
The speaker
volume control key allows you to adjust the
volume control of the speaker when using
the speakerphone. Pressing the [
+
] key
raises the volume to one of nine settings. Pressing
the [
-
]
will decrease the volume.
Ringer Volume Control
- Pressing the
ringer volume control key allows you to
adjust the ringer volume to one of four levels.
[Mute] Key
-
When talking using the handset,
press [
Mute
] to mute the handset transmitter. If
using the speakerphone, press [
Mute
] to mute
the station microphone. When using the
headset jack, the [
Mute
] key mutes the transmitter on
the headset.
ICM
-
The intercom system is the internal network
used to communicate between the telephone
extensions in your Iwatsu system. Pressing the [
ICM
]
key connects you to an intercom line for conversation
with other extensions.
Making an Outgoing Call
•
Lift the receiver.
•
Press an outside line key. You will hear a dial
tone.
•
Dial telephone number.
Make a dialing mistake?
•
Press the [
FLASH
] key to get new dial tone.
•
Dial again.
Receiving an Incoming Call
When your phone rings and lamp flashes:
•
Lift the receiver to connect the call.
If your phone does not connect you to the call
automatically
When your phone rings and lamp flashes:
•
Lift the receiver.
•
Press the key with the flashing lamp to
connect the call.
2
BASIC FEATURES
Summary of Contents for enterprise cs
Page 1: ......
