manualshive.com logo in svg

Iwatsu ENTERPRISE 5.0, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE 5.0 Owner'S Manual Download Page 138

DIGITAL TELEPHONE USER GUIDE - 120 

HOLD/DND (Hold/Do Not Disturb)

 - This key is used to put a call on 

Hold, to set the Do Not Disturb function to prevent any calls from getting 
through or ringing at your extension or to transfer the call to the number set 
in your Fixed Call Forward Destination. 

Note: Hold/Quick Forward is the default setting for the Hold/DND key in 
the IX-5800/5810. 

Volume Control: 

The 

-

 and 

+

 volume control keys are used adjust the Handset, Speaker, and 

Ringer volume based on the state of the telephone.

 

 

Receiver (Handset) Volume -

 When using the Handset, the volume 

control key allows you to adjust the handset volume to one of three levels. 

Speaker Volume

 - 

When using the Speaker, the volume control allows 

you to adjust the speaker volume to one of eleven levels.

 

Ringer Volume 

- Pressing the ringer volume control button allows you to 

adjust the ringer volume to one of four levels. 

LCD Backlight Duration

 -

 

The LCD backlight duration can be adjusted 

for each IX-5810 through the ECS telephone system. The LCD backlight 
duration can be set to 30 seconds (default), 1, 3, 5, 10, 20, 30, 60, 90, or 120 
minutes. (A telephone reset is required after changing the backlight duration) 

 

Many Iwatsu Enterprise-CS features can be operated by using the Self-
Labeling keys, dialing a feature operation code or using a one-touch 
multipurpose button, if your telephone has one assigned for that specific 
feature. The feature code numbers listed in this manual are preset in the 
Iwatsu Enterprise-CS. Your system installer may assign a different code 
number for any feature based on individual system requirements. 

Summary of Contents for ENTERPRISE 5.0



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands