manualshive.com logo in svg

Iwatsu ENTERPRISE 5.0, Owner'S Manual

Share
Download
Iwatsu ENTERPRISE 5.0 Owner'S Manual Download Page 136

DIGITAL TELEPHONE USER GUIDE - 118 

 OMEGATREK PS6 PORTABLE STATION (IX-PS6) 

The Omegatrek PS6 Portable Station is a lithium battery-operated portable 
telephone that allows users to make and receive calls within the service area 
covered by an Omegatrek IX-BS5 Base Station. The IX-PS6 Portable 
Station has a three-line display, eight multiple purpose keys each with a 
red/green LED, an integrated handset speaker for voice announce and hands-
free answerback, multiple ringing tones including vibrate mode, and an 
integrated headset jack. 

 

For operation instructions on the PS6 Portable Station please refer to the 

Omegatrek PS6 Digital Wireless Portable Station Owner’s Manual

 (Part 

Number 108500).

 

 

IX-PS6 Portable Station 

Summary of Contents for ENTERPRISE 5.0



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands