background image

This guide describes basic features and operations
for ADIX APS Omega-Phone telephones. This includes
Omega-Phone Digital Multiline Telephones and the
Omega-Phone MKT Digital Key Telephone.

Certain features are not available on all ADIX APS
models.  For more information, refer to the ADIX APS
Owner’s Manual or contact your authorized Iwatsu
distributor.

Multipurpose Keys - 

These keys can be programmed

for  specific functions, including outside line access,
individual extension selection, and one-touch feature
operation.

Key Lamps - 

These lamps light up or flash when

someone is using the line or feature corresponding
to that key. A green lamp indicates that you are using
that line/feature. A red lamp indicates that someone
else is using that line/feature.

SPKR (Speaker) -

 This button allows you to dial and

receive outside or internal calls and  converse without
lifting the receiver while using the hands-free
operation feature.

TRAN (Transfer) - 

This button allows you to transfer a

call from your phone to another extension.

FEAT (Feature) - 

This button is used to access many

ADIX features.

Note: 

The Echo Cancellation DSP technology used in the IX-12KTD/S-3

speakerphone was developed by NTT.

INTRODUCTION

HOLD/DND (Hold/Do Not Disturb) - 

This key is

used to put a call on Hold or to set the Do Not
Disturb function to prevent any calls from getting
through or ringing at your extension.

Handset Volume Control - 

The handset volume

control key allows you to adjust the handset volume
to one of three levels. Pressing the button will toggle
between the three volume levels.

Speaker Volume Control - 

The speaker volume

control key allows you to adjust the volume control
of the speaker when using speakerphone.  Pressing
the [

+

] key raises the volume to one of nine settings.

Pressing the [

-

]

 

will decrease the volume.

Ringer Volume Control - 

Pressing the ringer volume

control button allows you to adjust the ringer volume
to one of four levels.

[

Mute

] Key - 

When talking using the handset, pressing

the [

Mute

] key mutes the handset transmitter.  If  using

the speakerphone, pressing the [

Mute

] key mutes the

station microphone.  When using the headset jack,
the [

Mute

] key mutes the transmitter on the headset.

ICM - 

The intercom system is the internal network

used to communicate between the telephone
extensions in your ADIX APS system.  Pressing the
[

ICM

] key connects you to an intercom line for

conversation with other extensions.

Making an Outgoing Call

Lift the receiver

Press an outside line button.  You will hear a dial
tone.

Dial telephone number

Make a dialing mistake?

Press the [

FLASH

] button to get new dial tone

Dial again

Receiving an Incoming Call

When your phone rings and  lamp flashes

Lift the receiver to connect the call

If your phone does not connect you to the call
automatically

When your phone rings and lamp flashes

Lift the receiver

Press the button with the flashing lamp to connect
the call

BASIC FEATURES

1

2

108025 - ADIX QRG 7.10 3rd KT REV2.1.p65

1/29/2002, 3:28 PM

2

Summary of Contents for ADIX APS












Reviews: