11
power source
mains power
• This unit was designed to operate with an
AC 100-240V power supply.
• Connecting the unit to any other power
source may cause damage to the unit.
Unwind the mains cable to its full length.
Connect the mains plug to a mains socket.
Make sure the mains plug is fully inserted
into the mains socket. The unit is now
connected and ready to use.
• To switch the unit off completely, switch the POWER ON/OFF switch to the OFF
position or withdraw the mains plug from the mains socket.
general operation
switching on / off and selecting the function
• Switch the POWER ON/OFF switch at the rear of the unit to the ON position and then
press the STANDBY button on the remote control or press the iPad/AUX
button
on the unit to turn on the unit.
• Press the STANDBY button on the remote control again or press and hold the iPad/
AUX
button on the unit for over 3 seconds to switch the unit to standby mode.
• To completely turn off the unit switch the POWER ON/OFF switch at the rear of the unit
to the OFF position.
selecting modes
Press and hold the iPad/AUX
button on the unit for 2 seconds and then release or
press the iPad/AUX button on the remote control to select between iPhone/iPod/iPad
mode and AUX IN mode. The LED indicators will flash 3 times to indicate that the mode has
changed.
If the unit is idle for approximately 10 mins, it will automatically switch to standby mode.
adjusting the volume
• Press the /– button to adjust the volume.
• If you wish to switch the sound off, press the
MUTE button on the remote control.
Press the MUTE button again or the /– button to resume normal listening.
adjusting the sound effect
• Press the BASS +/– button repeatedly on the remote control to adjust the bass level.
• Press the /– button repeatedly on the remote control to adjust the treble
level.
MAIN POWER
OFF
ON
AC INPUT
AUX IN
VIDEO OUT
iPH10011_IB_RC_130308_Zell.indd 11
8/3/13 10:49 AM
