iWALK E318 W, User Manual

Page: 8 / 26

8
CLEANING THE INTERNAL SIDE BAND AND LUBE
To clean the inside of the band or to lubricate it, you must loosen the band's treadmill as shown in Figure 2,
once it is a little loose, put your hand under the band and a cloth wipe the surface to remove the accumulated
dirt or place a drop of oil lubricant in each of the sides (upper, middle and lower).
Once finished cleaning or lubricating the band, replace it as it was before. (See Figure 2)
HOW TO ADJUST THE BELT
Your band is factory set, but could stretch or misaligned. Perhaps
the running belt needs adjusting during first weeks of use.
Stretching be normal during the molding. (See Figure 2).
Turn right wing to tighten the band Turn left wing to loosen the band
(figure 2)