- 11 -
1. Installation
Example of recommended piping
q
Discharge pipe
w
Discharge valve
e
Check valve
r
Pressure gauge
t
Motor
y
Pump
u
Flexible joint
i
Vacuum gauge
o
Suction pipe
!0
Suction valve
!1
Gate valve
!2
Air vent piping
!3
Pipe support
1. Installed position
•
Install and fix the pump on the foundation which is not affected by vibration generated by other machines.
•
Keep enough space around the pump for the back pull-out of motor, assembly and disassembly of the pump.
•
Foundation area must be larger than pump base plate.
2. Location
•
Install the pump as close to the tank as possible and at lower position than the tank (flooded suction).
•
If the pump is installed at the location that the pump suction port comes higher position than the liquid level
of tank (suction lift style), install the priming piping and foot valve at the end.
3. Foundation
•
Refer to illustration below.
1
2
3
11
10
13
10
12
11
6
5
9
7
4
8
7
12
Within
1m
Concrete foundation
Foundation bolt
Baseplate
liner
