- 2 -
WARNING
•
Look around
Make sure there is no one around the pump when connecting the power cable. The
power supply switch is not provided on the pump. Connecting the power cable and
supply air to the pump starts pump operation.
•
Do not remodel pump
Never try to remodel the pump. Remodeling may be a cause of serious accident or
damage. Iwaki takes no responsibility for accidents or damages that may result due
to any remodeling without first obtaining permission from Iwaki.
•
For specified application only
The use of a pump in any application other than those clearly specified may result in
injury or damage to the pump. Use the pump strictly in accordance with the pump
specifications and application range.
•
Do not drain
Never discharge hazardous liquid, including but not limited to chemical liquid, over
the ground or floor in the plant directly.
Abide by local regulations when disposing of hazardous substances.
•
Do not touch
Touching the pump or piping which is extremely hot due to the circulation of a hot
liquid may cause severe burns. Arrange adequate hand-protective measures when
feeding a liquid at temperatures higher than 50 °C.
CAUTION
•
Do not exceed the specified voltage
Do not supply power voltage in excess of the level specified. Otherwise, a fire or
electric shock may resulted.
•
Wear protectors
Never fail to wear protective gear (protective goggles, cap, mask, acid-resistant
gloves) when disassembling, assembling, or maintaining the pump. In addition,
clean the pump carefully with pure water before working on the pump.
•
Qualified operator only
The pump must be operated only by operator(s) who have been trained in the safe
operation of the pump.
Safety Section
