9
Warning:
Do not charge device for more than 12 hours.
1. Power off the Rincon
2. Connect the Rincon to a USB wall plug
3. A green/blue and a red light will show; the green/
blue light will turn off after 3 minutes (memory card
inserted) or after 10 seconds (no memory card
inserted)
4. The red light will show during charging and power
off when fully charged
C. INSERT MICRO SD CARD
To access the SD card slot, lift the rubber cover
on the left arm of the glasses. For best results, we
recommend a class 10 micro SD card. The Rincon
supports up to a 128GB SD card. (Purchased sepa-
rately)
1. Power off the Rincon
2. Lift the cover on the left arm of the Rincon
3. Insert a micro SD card into the slot until you feel it
click into place
4. The slot is spring loaded; to remove the card,
push it down until you feel it release
D. POWER ON/STANDBY/OFF
The power button is on the rubber cover on the left
arm of the Rincon.
1. To turn on, press the power button; the Rincon
will vibrate twice
2. A flashing blue or green light will show indicating
that recording has started (blue=1080P, green=720P)
3. To enter standby mode, press the power button
once; it will vibrate and enter standby mode (in this
