IVT Rego 5101, Installation Manual

Page: 22 / 40

Settings
6 720 645 172 (2010/07) en
22
In Own heat
curve
Own heat curve
Actual v.
:
Set point :
Settings > Own heat curve
P:
I:
Deviation :
Pump :
Display
0 °C
0
0
0 K
Off Winter , Summer , Off , On
E21
B
Set the heat curve that shall apply for the unit in Set point curve .
B
Set appropriate values for P and I.
B
Set the temperature deviation that shall cause an alarm Accessory x temp. deviation
(
Æ
Chapter 5.6.51, page 36).
B
Enter pump function. Winter means that the accessory circulation pump is in operation during winter
operation.
The unit uses an externally connected sensor to control a 0-10V connected mixing valve to maintain
the set point value according to settings in
Set point curve .
In E11 heat
curve
E11 heat curve
Actual v.
:
Offset :
Settings > E11 heat curve
P:
I:
Deviation :
Pump :
Display
0 K
0
0
0 K
Off Winter , Summer , Off , On
E21
B
Set appropriate values for P and I.
B
Set the temperature deviation that shall cause an alarm Accessory x temp. deviation
(
Æ
Chapter 5.6.51, page 36).
B
Enter pump function. Winter means that the accessory circulation pump is in operation during winter
operation.
The unit uses an externally connected sensor to control a 0-10V connected mixing valve to maintain
the set point value according to the heat curve for E11.T1.
In Fixed sp
cooling
Fixed sp cooling
Actual v.
:
Set point :
Settings > Fixed sp cooling
P:
I:
Deviation :
Pump :
Display
0 °C
0
0
0 K
Off Winter , Summer , Off , On
E21
B
Set the fixed set point value that must apply.
B
Set appropriate values for P and I.
B
Set the temperature deviation that shall cause an alarm Accessory x temp. deviation
( Æ Chapter 5.6.51, page 36).
B
Enter pump function. Summer means that the accessory circulation pump is in operation during
summer operation.
The unit uses an externally connected sensor to control a 0-10V connected mixing valve to maintain
the stated fixed set point value.
Setting Factory Range HP
Tab. 37 Accessory