![background image](http://html1.mh-extra.com/html/ivt/pl-810/pl-810_operating-instructions-manual_2097892004.webp)
3.
Two work lamps can be connected bottom to bottom.
4.
The work lamp is equipped with a 230 V AC socket.
Replacing the light bulb
Attention! Use only light bulbs with GX24q-4 socket and up to 42 W for this work lamp.
Please consider that the light bulb might
be hot. Don’t touch it without proper protection or wait until the light bulb has cooled off.
Fig. 1 Fig.2 Fig.3 Fig. 4
1.
Switch off the lamp and disconnect the mains plug from the 230 V AC power supply
2.
Open the housing by turning the transparent cover counter-clockwise (Fig. 1)
3.
Remove the transparent cover (Fig. 2)
4.
Now remove the rubber ring carefully from the retaining spring of the light bulb and then release the retaining spring. (Fig. 3)
5.
Pull the light bulb carefully out of the socket (Fig. 4)
6.
Insert the new light bulb
7.
Fix the light bulb by means of the retaining spring
8.
Secure the retaining spring with the rubber ring.
Attention! The rubber ring must be seated under the light bulb so that it cannot slip unintentionally.
9.
Now put the transparent cover on the lamp and close it by turning it clockwise as far as it will go.
Attention! The work lamp must only be put into operation with duly closed housing.
Maintenance and Cleaning
Except for the replacement of light bulbs, the work lamp does not require any maintenance.
Clean the outside of the device only with a soft cloth or brush. Never use aggressive cleaning agents or chemical solutions, since they
may damage the housing or impair the function of the device.
Technical specifications
Operating voltage:
220 – 240 V AC/50 Hz
Bulb:
42 W
Socket:
GX24q-4
Connection of sockets:
max. 2700 W/12 A
Protection type:
IP 44
Protection class:
I
Length of cable:
5 m
Dimensions:
200 x 280 mm
Weight:
2,100 g
Environmental protection note
At the end of its useful life, this product must not be disposed of together with normal household waste, but has to be dropped off at a
collection centre for the recycling of electrical and electronic devices. The materials of which this product is made are recyclable
pursuant to their labelling. With the reuse, the recycling of the materials or other forms of scrap usage you are making an important
contribution to the protection of the environment. Please ask your local administration office for the appropriate disposal centre.
Technical specifications are subject to change. We assume no liability for typographical errors. V1_01/2012
IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, D-92242 Hirschau
Phone: 09622 – 719910, Fax: 09622 – 7199120;
Summary of Contents for PL-810
Page 9: ......