IVT ID-710BMC, Manual

Page: 8 / 72

8
EN
Instruction manual
PART LIST
1. Ring gear drill chuck
2. Drilling / impact drilling selector switch
3. Ventilation slots
4. Depth ruler
5. Auxiliary handle
6. Screw for auxiliary handle adjustment
7. Rotational direction switch
8. Variable speed thumbwheel
9. On / Off switch
10. Locking button for On / Off switch
11. Drill chuck key
12. Keyless chuck
CONTENT OF THE BOX
ID-710BMC
Instruction manual (1 pc), depth stop (1 pc), auxiliary
handle (1 pc), drill chuck key (1 pc), carbon brushes set
(1 pc), screwdriver bit (5 pcs) (with bits holder), drill bit
set (9 pcs).
ID-710BMC II
Instruction manual (1 pc), depth stop (1 pc), auxiliary
handle (1 pc), drill chuck key (1 pc), carbon brushes set
(1 pc), accessori (44 pcs).
INTENDED USE
This tool is intended for impact drilling in brick, concrete
as well as for drilling in wood, metal, ceramic and plastic.
Machines with electronic control and right/left rotation
are also suitable for screwing and thread cutting.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user’s manual and all other literature
supplied with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙ The tool must be assembled correctly before use.
∙ Only use the tool for its designed purposes.
∙ On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙
Keep children and pets away. All onlookers should be
kept at a safe distance away from the tool when it is in use.
∙
The user is responsible for third parties while
working with the tool.
∙
People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
TOOL SPECIFICATIONS
Model ID-710BMC; ID-710BMC II
Voltage ~ Frequency [V ~ Hz] 230 ~ 50
Rated power [W] 710
No-load speed [RPM] 0 - 3000
Percussion rate [BPM] 0 - 30500
Drilling capacity in steel [mm] 10
Drilling capacity in wood [mm] 20
Drilling capacity in concrete [mm] 13
Weight [Kg] 2.2
Safety class II