PART LIST
1.
Outshell
2.
Switch knob
3.
Thermostat knob
4.
Handle
5.
Holder stand
6.
Fixing screw nut
CONTENT OF THE BOX
Instruction manual (1 pc).
INTENDED USE
This machine is intended for ventilation or for heating
both industrial and private spaces.
SAFETY REGULATION FOR THE
USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙
Never allow children to use the tool. Children should
be supervised to ensure that they do not play with the
tool.
∙
Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙
The user is responsible for third parties while working
with the tool.
∙
People who aren’t acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication are
not allowed to use the tool. Local regulations may restrict
the age of the operator.
WARNING! The consumption of
alcohol, medication and drugs, plus
states of illness, fever and fatigue will
affect your ability to react. Do not use
this tool in any of these situations.
∙
Make sure that all the protective devices (if present)
are fitted and are in good condition.
∙
Never operate the tool with defective safety devices
or guards (if present), or without safety devices in place.
∙
Inspect the entire tool to look for loose parts (e.g.
nuts, bolts, screws, etc.) and for any damage. Check
at frequent intervals if screws and bolts (if present) are
properly tight to be sure the equipment is in safe working
condition. Repair or replace them, if necessary, before
using the tool. Serious injury to the operator and to the
TOOL SPECIFICATIONS
Model
EFH-2000C EFH-3000C EFH-3000C2 EFH-5000C EFH-9000C EFH-15000C
Voltage ~ Frequency [V ~ Hz]
230 ~ 50
230 ~ 50
230 ~ 50
380 ~ 50
380 ~ 50
380 ~ 50
Rated power [W]
2000
3000
3000
5000
9000
15000
Productivity [m
3
/h]
250
250
400
500
800
1700
Output at position I [W]
25
25
30
30
52
90
Output at position II [W]
1000
1500
1500
2500
4500
7500
Output at position III [W]
2000
3000
3000
5000
9000
15000
Heat output [Kcal/h]
1720
2580
2580
4300
8000
12900
Weight [Kg]
2.7
2.9
6
7.2
10.6
21
Safety class
IP44
IP44
IP44
IP44
IP44
IP44
6
EN
Instruction manual
Summary of Contents for EFH-15000C
Page 5: ... F1 EFH 2000C EFH 3000C EFH 3000C2 EFH 5000C EFH 15000C EFH 9000C C 3 2 MAX MIN C 3 2 5 ...
Page 42: ......
Page 43: ......