6
Audio Source:
Select the audio input mode, LineIn or MicIn selectable
Format:
Switch to select the PAL and NTSC image scanning system
Device Time:
Set and display the device current time
After complete all parameters setting, click
Save
and then it will take effect immediately.
4.2 QR Code
Scan the QR code to login directly via mobilephone client, the IP camera QR code interface as shown in the
following figure. (Note: After enable the corresponding protocols in the platform management interface, then the
QR code icon will display. QR code support: Fseye. During the platform management interface, Device_ID
protocol should be matched with Fseye Client.)
4.3 ePTZ Setting
IP Camera
ePTZ Set
interface as shown in the follow figure:
Summary of Contents for NC649A
Page 1: ...Network Camera User Manual...
