Ivsec NC649A, User Manual

Page: 19 / 35

15

Enable PTZ: When motion detection triggers alarm, it will linkage the PTZ motion

Preset:
When motion detection triggers alarm, it will linkage the presets

Snap Interval: Set the snapshot interval time

Snap Count: Set the snapshot image count for this time
After complete all parameters setting, click Save and then the settings will take effect immediately.
4.12 Area Detection
IP Camera Area Detection setting interface as shown in the follow figure:

Enable: Enable or disable the Area Detection function

Arm Schedule: Can be set the arm schedule from Monday to Sunday

Mask Set: Press and drag the left mouse button to set the detect zone in the Area Settings preview interface,
then click the right key to complete the setting, and the objects of this area will be monitored and detected

Clear:
Click
Clear
to delete all the detect zones.

Detect Zone: To add new detect zone (support max. 4 detect zones), can be set the parameter setting for the
corresponding detect zone optional

Detect Type: Set the target detect type, there are four detect types, all of them will trigger alarm. Target enter
refers to once the target enter into the detect zone, the camera will trigger alarm, Target leave refers to the target
go out the detect zone, the camera will trigger alarm,
Target enter or leave
refers to both of them happen, the
camera will trigger alarm .Target Wander refers to the target enters into and goes out the detect zone for many
times, the camera will trigger alarm

Target Percent: Set the min. area percent for the object, the area of object is smaller than the setting value, it
will be invalid

Time:
Set the upper limit value for the item lost and item abandon, when it is more than the setting value, it will
trigger alarm function automatically

Email: Click Email . Once alarm triggers that it will send Email to appointed mailbox

Snap: Click Snap. Once alarm triggers that it will linkage camera to snapshot picture and store it in the TF card

Record: Click Record. Once alarm triggers that it will linkage camera to record video and store it in the TF