Ivoclar Vivadent SR Ivocap, Operating Instructions Manual

Page: 5 / 16

5
1.1 Introduction
The SR Ivocap System is an
injection technique which
has been especially
developed to compensate
curing shrinkage. Heat/
pressure curing allows
shrinkage of the acrylate
during polymerization to be
compensated by inflowing
material.
The SR Ivocap injection
technique, therefore, permits
the fabrication of high
quality products with
excellent physical properties.
Indication
• Complete dentures
• Partial dentures
• Relines
• Orthodontic appliances
• Occlusal splints
Contraindication
Keep unpolymerized
material away from
intraoral areas. Do not use
the material if the patient is
known to be allergic to any
of the ingredients listed.
The SR Ivocap System
may only be
operated by trained
personnel.
1.2 Signs and symbols
The signs and symbols in
these Operating Instructions
facilitate the finding of
important points and have
the following meaning:
Risks and dangers
Important
information
Contraindication
1.3 Notes regarding
the Operating
Instructions
These Operating
Instructions must
be read prior to
working with the
SR Ivocap System.
Equipment concerned:
SR Ivocap System Target
group: Dental technologists
The Operating Instructions
facilitate the correct and
economic use of the
SR Ivocap System.
These Operating Instructions
are divided in several, clearly
structured chapters. They
should enable you to locate
specific topics quickly and
easily.
The SR Ivocap material is not
described in these instruc-
tions. Please refer to the
corresponding Instructions
for Use of the Ivocap
material.
The inform your about
risks/dangers, important
information, and contraindi-
cations, these Instructions
contain corresponding signs/
symbols (pictographs) to
mark important paragraphs.
We recommend keeping the
Instructions in a safe place
near the equipment to have
immediate access to the
information if necessary.
Should you lose the
Operating Instructions, extra
copies can be ordered at a
nominal fee from your local
Ivoclar Vivadent Service
Center.
1. Introduction / Signs and Symbols