14
Step 2:
Mounting the spacer
The spacer (45) can be mounted to the rear of the
furnace with the help of the fastening pin
intended for this purpose. Press the spacer
strongly against the rear of the furnace.
For safety reasons, the spacer must always be
mounted.
Secure the cooling tray (26) with the two screws
(27) including the silicone washer (28).
Place the cooling tray (26) on the frame plate (5).
Make sure that the cooling tray (26) is correctly
positioned on the frame plate (5) and that the
danger symbols are visible from above.
27
28
26
5
