12
Programming the Unit / Turn off timer
Press the “Turn Off Timer” button to program the heater for resuming work for another
hour. You can set it to a maximum of four hours. The appliance is automatically turned off
when the timer hits zero. If pressed and held (take 1 second before pressing again), the
turn off timer goes up by one hour, and returns to 0 -is deactivated- after 4. The turn off
timer is indicated with four LEDs, with each corresponding to one hour. The number of lit
LEDs indicate the remaining time before turn off.
Example:
If two LED lights are lit and one LED light blinks, the appliance has 2 hours and
30 to 45 minutes to turn off.
In case of power outage and return, the appliance resumes work with saved settings.
Power Indicator Levels Setting
The heater has four power indicator levels shown by four LED lights. Press the “Power
Indicator” button to set it to a level from 1 to 4. Levels switch as you press on the
“Power Indicator” button. Release the button when the LED light(s) is/are on for the pre-
ferred power level. The lit LED(s) indicate(s) that the appliance is set to the corresponding
power level.
Turning off the Appliance
Press the “On/Off” button for more than 1.5 seconds to turn off the appliance. The
orange LED light is on when the appliance is off.
Summary of Contents for EHR5012P275
Page 50: ...ivigo com InstantHeatWithFanForced ELECTRIC HEATER WITH FAN...
Page 66: ...ivigo com ivigoConvector SmartHeater wInter LOVE...
Page 67: ...5 JamstvA godina...
Page 68: ...08 2020...