Chapter 4: Using iView Utility to Setup IP & Update Firmware
WARNING:
Do not lose this password. lf the password is lost, you can not access the device
To make changes.
To remove the password, you must first enter a valid “Input Device Password”, go to
“Device Password” and delete the entries, click “OK”.
ii. Management Protocol
The administrator can determine the parameter settings when providing access via
HTTP (web) to iView. For security reasons, the administrator can choose to use
either an open or advanced port setting to control these accesses.
The default values are set to port number 80 for HTTP.
Once the HTTP port number is set to another port (other than 80), the full IP Address
must be entered in order to access the Website.
F
*
If a value of 61 is set as the HTTP port number, then http://192.168.0.177:61
or example:
must be entered as the IP address in order to access iView website.
Uncheck to disable this function.
2.4 Upgrade Firmware
iView Utility offers a convenient method to upgrade iView firmware.
1. Click “Upgrade Firmware” to bring up the Wizard.
Fig.12 Upgrade Firmware: Updates iView firmware
iView User’s Manual -17-