4
3 Functions
3.1 Setting Address Code
Setting address code before using the dome camera, it could be setup by the
dip-switch or soft address.
3.2 Zoom/ Rotation Auto Match Technology
The camera can adjust automatically pan tilt speed according to the zoom far
or near, make sure easier to operate manual motion detection.
3.3 Auto Pan
The operator pulls the lens to the bottom, and still holds the joystick, at this
time, the lens level up 90° flip after auto pan rotation 180°, can watch directly
the back of scene in order to achieve 180° continuous vertical monitoring.
3.4 Setting or Calling preset
The dome camera supports 254 presets.
3.5 Lens Control
(1) Zoom Control
User could adjust zoom far or near by keyboard or matrix system, in order to
get the full picture or the fine view.
(2) Focus Control
The default of dome camera is auto focus, zoom, the camera lens will
automatically focus the center of the screen scene, maintaining a clear image;
in special cases the user can manually focus, to achieve the desired image
effect.
When in manual focus state, to resume the auto-focus, use the joystick can be
restored to auto-focus. Besides, you can send a special control command or
call any preset to restore auto-focus.
3.6 Iris Control
User can control the keyboard to adjust the iris manually to get the brightness
of the picture.
Summary of Contents for CZ-531-12
Page 8: ...6 B Install the dome camera as shows 4 2 System Connection...
Page 36: ......
