IVIEW CZ-531-12, Manual

Page: 10 / 36

8
5.1 Power On Self -Check
When power on, the camera moves automatically from pan range to tilt range,
after movement, pull the lens to the nearest and then to the farthest, make sure
the camera is running in normal.
After the display information disappeared, press direction key “Left” and
“right” twice, the camera could auto detected the baud rate,protocol and 485
polarity of the control device, then the camera could be controlled in normal.
Remark: After the camera auto detected the baud rate, protocol and 485
polarity of the control device, but when changed the baud rate and 485
polarity of the control device, restart the camera, then the camera could
auto detected again and be controlled in normal.
5.2 Control the Direction of Camera
Using “UP, DOWN, LEFT, RIGHT” direction key control PTZ Camera to a
desired position.
5.3 Camera Lens control
5.3.1 Zoom
Adjust the lens distance to enlarge or downsize the image for best effect or
wide-angle effect.
♦
Using “ZOOM IN / TELE” key to enlarge the images.
♦
Using “ZOOM OUT/ WIDE” key to downsize the images.
5.3.2 Focus
Adjust definition of the object of scene
♦
Press “Focus Far” key to shorten the distance of far scene.
♦
Press “Focus Near” key to shorten the distance of near scene.
PROTOCOL: AUTO
BAUD RATE: AUTO
ADDRESS: 1