Electrical power short circuit protection
- All of the ED7 systems are internally short circuit protected with resettable fuse. There is no need to install external
inline fuse in orange wire connected to the ignition switch, vehicle positive connection 12 to 55 VDC.
-
Automotive 60 V load dump protection. Reversal power supply protection.
“Quick test to determine if electrical connections are done correct”
After you have connected electrical power and pressure transducer cable you can check the system operation.
- Turn on ignition switch.
- Tap on Home icon and than tap on the
“Clock & More”
icon shown on LCD
display home page.
- Tap on
“Pressure Transducer Test”
. LCD display will show digital readout
change as forks are lifted and lowered.
-
If the above test is valid than the system pressure transducer electrical
connections are done right.
Note:
If the readout shows 0 or only high readout number value over 65000, than
check wiring connection to the pressure transducer or replace pressure transducer.
Date / Time Set Up
Tap on the icon
Clock & More
shown on home page.
- Tap on the icon
“Set Clock”
.
- Use “Set” and “arrow up” and “arrow down” input to change time and date if
required
- When done tap on
“Home” i
con to save the values.
Vehicle ID#
-Tap on the icon
“Admin”
. - Password table will be shown.
- Input a following password:
A123
and press
“Next
icon
”
.
- Input valid Vehicle ID#
Note:
Maximum 4 digits !
- Tap on
“Next
icon
”
to confirm the vehicle ID#. Press
Home
icon.
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
