Accumulative Load Weight & Printouts with Onboard Printer:
Left Button
:
Accumulative Function for load weights
Right Button
: Print/Reset
Every time the indicator display shows the load weight and the
right button
is pressed, the
current load weight ticket will be printed and the system load weight counter will RESET.
Example of single load weight being printed:
IVDT Skidweigh
4380
Every time the indicator shows the load weight and the
left button
is pressed, the load weight will
be added into a load weighing counter. It will also show the current total weight of all load
weights entered in the load weight counter.
(A quick “blink” on the display indicates that the
current load weight has been added into the counter)
At any point you can obtain a ticket for all entered load weights stored in the load weighing
counter by pressing the
right button
. The printout will show all individual load weights and total
weight. As soon as you lower the forks and the last load weight is no longer on the display, the
system will be RESET.
Example of two load weights added in the weighing counter and being printed:
IVDT SkidWeigh
#01 = 01550
#02 = 01000
TOTAL = 2550
The maximum number of load weights entered into the accumulative load weigh counter is 40. If
the number of 40 loads has been reached, the display will show the current total weight of all 40-
load weights entered. This current total weight will stay and “flash” on the instrument display for a
moment. The current accumulative counter of all 40 load individual weights and total weight will
be printed out. The system will reset automatically and you can start the new cycle again.
Summary of Contents for SkidWeigh ED2-EPT Series
Page 17: ......
