Accumulative Load Weight Function Without Onboard Printer:
Left Button
:
Accumulative function for load weights
Every time the
indicator shows the load weight
and the
left button
is pressed, the load weight
will be added into a weighing counter and will show the current total weight of all load weights
entered in the counter.
(A quick “blink” on the display indicates that the current load weight has
been added into the counter.)
To reset the current load weighing counter or get a printout, press the
right button
. This will reset
the current total and the cycle will start all over.
Right Button
: Reset
Note:
Weight loads can be added only while the indicator shows the load weight. If the load
weight is lowered and
Mode 8
is shown on the display, the last load weight will not be added
even if the
left button
is pressed.
The maximum number of load weights entered into the accumulative counter is 40. If 40 loads
have been reached, the display will show the current total weight of all 40 load weights entered.
This current total weight will stay and “flash”on the instrument display for a moment. The current
accumulative counter of all 40 load weights will be reset automatically and you can start the new
cycle again.
Summary of Contents for SkidWeigh ED2-EPT Series
Page 17: ......
