IVAR SUPERAC 1045 SUPERAC 1220, Instruction Booklet

Page: 21 / 42

TECHNICAL SPECIFICATIONS
It is very important to inspect the boiler/flue fitting seal because of the above
reasons.
Check the pumps correct sense of direction.
Check the total standstill of the appliance by turning off the main switch.
After all conditions have been satisfied, the burner must be tested at the boiler
max. output by examining the combustion products to reach the correct
combustion as well as the less polluting emissions as possible.
Smoke temperature under normal working conditions ranges from approx. 170
÷
200°C.
When the boiler is working, the pressure of the water contained in the system
increases. Therefore, ensure that its highest value does not exceed the boiler
max pressure.
MAINTENANCE
Periodical maintenance is essential for safety, output and the generator life
span.
Furthermore, it is mandatory and it must be carried out by professional
qualified personnel.
Before any servicing, it is recommended that a combustion analysis be
performed to find out the operating conditions as well as indications on how
to intervene.
After the combustion analysis has been performed and before any other
operations:
- power off the system by turning off the main general switch;
- close the fuel on-off cocks.