Page 19
Operation and maintenance
Envistar Compact
DSEC181201.00.EN
Continuous product development may give rise to specification changes without notice.
Filter replacement
1. Shut down the unit via the service switch in the control equipment, safety
switch in the 0 position.
NB:
The safety switch is not designed for starting/stopping the unit. Always
use the service switch in the control equipment to start and shut down
the unit.
2. Wait until the fans have stopped, then open the inspection door.
WARNING!
Positive pressure inside the unit, risk of personal injury. Allow
the pressure to drop before you open the inspection doors.
3. Release the eccentric
rails.
4. Remove the old filter
by pulling it towards
you.
5. Clean the filter cabi-
nets.
6. Install the new filter,
press in the eccentric
rails to engage them
and close the inspec-
tion door.
7. Reset the FLC filter
control function via the
Climatix display, refer
to separate Climatix
control documentation.
(Only applicable to the
Home Concept version
of the unit with carbon
filter and integrated
control equipment
(code MX).)
8. Start the unit.
Eccentric rails inside the unit
Summary of Contents for Envistar Compact Series
Page 2: ......